How to Create a Feature Wall Using 1000mm Bathroom Panels
A feature wall is one of the quickest ways to transform a bathroom's character. 1000mm wide panels are ideal — their wide slab format creates a seamless, almost monolithic surface that acts as a bold visual anchor.
Why 1000mm Panels Work Best for Feature Walls
A typical bathroom wall needs only 2–4 panels to cover it completely. The result is a near-seamless surface with just one or two near-invisible joins — far less visual noise than tiles or narrower panels.
The Best Finishes for a Feature Wall
Marble Effect
White Carrara, Grey Venetino, or Calacatta marble-effect panels create a timeless, high-end feature wall. The wide format allows veining to flow across the wall with minimal interruption.
Concrete Effect
Warm concrete and industrial grey finishes create a bold, contemporary feature wall — particularly striking behind a freestanding bath.
Natural Stone Effect
Slate, sandstone, and travertine-effect 1000mm panels create a dramatic, textured feature wall that pairs beautifully with warm wood fittings.
Deep Colour
A feature wall in charcoal, navy, or forest green using 1000mm panels makes a statement that tiles simply can't match as cleanly.
Choosing the Right Wall
The best feature wall is typically: the wall you see first when you enter the bathroom, the wall behind the bath, or the shower back wall.
Step-by-Step Installation
- Choose and prepare the wall — ensure it's flat. Fill any dips over 2–3mm.
- Calculate how many panels you need — wall width ÷ 1000mm, plus 10% waste.
- Apply solvent-free adhesive in vertical lines every 300mm.
- Press each panel firmly, check vertical with a spirit level.
- Engage tongue-and-groove joins and run silicone into any visible join line.
- Seal all perimeter edges, corners, and joins with waterproof silicone.